Monday 16 January 2012

Wedding DIY - An Heirloom Bouquet


Whether you're a little arty and creative or you have some family members or friends who are, there are always ways to add a little DIY to your wedding day, to help stretch the budget or add your personality.

How about making this beautiful heirloom bouquet as featured on Fancypants Weddings Blog ... Isn't it just gorgeous?? I would have one of these in a heartbeat and although I'm fairly arty, and creative, I have friends who are just a little better than me ;0)




How to make a Brooch Bridal Bouquet:
Supplies:
50-85 brooches, large earrings or necklaces

2 yards 5 inch wide Midori taffeta ribbon in gold

3 yards 3/8 inch wide Midori velvet ribbon in almond

3 yards of clear and gold seed beads strung on wire

Scissors

Wire cutters

Needle nose pliers

Hot glue gun with glue

22-gauge green florist wire

Light green corsage tape

Clear gem topped pins

2 stems of inexpensive artificial hydrangea-light green
Choosing your brooches:

You should consider a few things when choosing the jewelry pieces you are going to include into your brooch bouquet.
1. Colors- Choose at least three but not more than five color families and stick to them. I used shades of green, purple, turquoise and gold pieces with antique gold as my metal accent.
2. Finish- Choose one metal type. I prefer to use either all shades of gold metals or all shades of silver. I think it gives your finished brooch bouquet a more polished look.
3. Size- Pick jewelry pieces in a variety of sizes. It will give your bouquet depth and dimension.
4. Sentimentality- You may want to include a few pieces of jewelry that have special meaning to you. A brooch your grandma always wore, you and your fiancĂ©e’s initials or the earrings your mother wore on her wedding day would all be sweet additions.
5. Value- I would not use any jewelry pieces that are worth too much money. The bouquet will be tossed around and set down all day long. It would be terrible to loose a particularly valuable piece of jewellery.
6. Inspiration- If you have a brooch that you love use it to inspire to colors of the entire bouquet.







Step One: Wire and taping


Attach wire to your jewelry pieces. Since each brooch will be different you will need to alter your wiring technique for each piece. For heavier pieces you will want to use a couple of pieces of wire. The wired brooch should not droop when you hold it between two fingers otherwise it will not hold up in the finished bouquet.


Twirl the corsage tape down the wire pulling as you go. The tape sticks best when gently pulled and is overlapping itself. This will take some practice. Be patient and take your time.


The wired and taped brooch should be sturdy. The tape finishes the wire, holding multiple wires together and adding some strength.


Repeat until all your jewelry pieces are wired and taped.





Step Two: Assemble the brooch bouquet


Hold the hydrangeas in your left hand. Insert your wired and taped jewelry pieces one at a time. The hydrangea acts as a spacer and it fills in any gaps between the jewelry pieces so you cannot see the wires. The hydrangea will be completely covered when you are done with your bouquet. Rotate the bouquet as you insert the brooches while maintaining a pleasing domed shape.


After you have added all the wired brooches and have the bouquet in a shape you like, gather all the wire ends tightly together and wrap with the corsage tape to form the handle of the bouquet.






Step 3: Seed bead loops


Make 3-inch loops out of wired seed beads.


Continue looping until you are holding four loops.


Attach a long wire and tape the length. Make a total of four seed bead clusters.


Collar the bottom of the bouquet with the seed bead loops. Tape the wires in place down the handle of the bouquet.





Step Four: Ribbon collar and handle


Cut eight inches of the ribbon and set aside. Grasp the remaining ribbon in two fingers on the end at the edge. Hold the copper wire that runs the length of the ribbon and start pulling the wire, pleating the ribbon as you go. Continue until the entire ribbon is ruffled.




Grasp the wire you used to pleat the ribbon at both cut ends. Twist the wire together.

Run a bead of hot glue down the rough edges of both ends of the ribbon. Press the glued ends together to form a seam.

Wrap the stem of the bouquet with the eight inches of ribbon you placed to the side.



Place the bouquet handle through the ribbon collar. And glue in place.


Wrap the seam of where the bouquet collar meets the handle in velvet ribbon. Finish with a small bow and the gem headed pins.




The finished aisle worthy bouquet!




Another version of the brooch bouquet with fresh flowers included throughout the arrangement.




Brooch bouquet collared with fresh flowers.




Until next time ...





3 comments:

  1. Love the wedding bouquets! It's really unique and cool. Thanks for sharing.

    ReplyDelete
  2. Wow! Thanks for sharing some procedures on how to made that wedding bouquet. It's really beautiful. Thumbs up!!

    ReplyDelete
  3. This DYI wedding bouquet is really unique. This is really creative and full of art. Of course this will help stretch the budget or add the bride's personality.

    ReplyDelete